|
High Efficiency with
XL13i
XL13i Benefits
High Efficiency
 | 13.0 SEER on Air Conditioner |
| 13.0 SEER and 9.25 HSPF on Heat Pump |
| Contains R410A Refrigerant |
Lasts a
Long Time
| Climatuff® Compressor |
| Full-Side Louvered Panels |
| Weatherguard II™ Top |
| Corrosion-Resistant Screws |
| Spine Fin™ Outdoor Coil |
| Unique DuraTuff™ non-corrosive Basepan |
Quiet
Comfort
| Unique Mounting of Shaft Down Fan Motor |
| Two-Speed Fan |
| Low-Resistance Airflow |
| Sound Insulator on Compressor |
Backed by
Trane’s Industry Leading Limited Warranty
| Ten-Year Limited Warranty on compressor and outdoor coil |
| Ten-Year Limited Warranty on internal functional parts on Units installed after October
1, 2001, and manufactured after January 1, 2000 |
| Optional Extended Warranties available. Extended warranties cover labor, refrigerant,
and other costs not covered by Manufacturer Limited Warranty so you are covered for all
parts and labor for the lifetime of the warranties |
| If You have an indoor gas furnace, coil or air handler installed at the same time as an
XL13i outdoor condensing unit, those units will be covered for 10 years on internal
functional parts as part of the outdoor unit system warranty |
| Ask your dealer for full warranty information at time of purchase |
XL13i
AIR CONDITIONER
| Model |
Nominal
Tons |
Height
(in.) |
Width
(in.) |
Depth
(in.) |
| 4TTX3018A |
1.5 |
40 |
33 |
30 |
| 4TTX3024A |
2.0 |
40 |
33 |
30 |
| 4TTX3030A |
2.5 |
40 |
33 |
30 |
| 4TTX3036A |
3.0 |
40 |
33 |
30 |
| 4TTX3042A |
3.5 |
44 |
33 |
30 |
| 4TTX3048A |
4.0 |
48 |
33 |
30 |
| 4TTX3060A |
5.0 |
42 |
37 |
34 |
XL13i
Weathertron® Heat Pump
| Model |
Nominal
Tons |
Height
(in.) |
Width
(in.) |
Depth
(in.) |
| 4TWX3018A |
1.5 |
40 |
33 |
30 |
| 4TWX3024A |
2.0 |
40 |
33 |
30 |
| 4TWX3030A |
2.5 |
40 |
33 |
30 |
| 4TWX3036A |
3.0 |
48 |
33 |
30 |
| 4TWX3042A |
3.5 |
48 |
33 |
30 |
| 4TWX3048A |
4.0 |
42 |
37 |
34 |
| 4TWX3060A |
5.0 |
46 |
37 |
34 |
Potential energy savings may vary depending on your personal lifestyle, system
settings, equipment maintenance, local climate, actual construction and installation of
equipment and duct system.
As part of our continuous product improvement, Trane reserves the
right to change specifications and design without notice. Read important energy cost and
efficiency information available from your dealer.
|
